SC Wood
Water-based wood sealer
Fields of application
SC Wood is a water-based sealer that is used to treat and protect wood surfaces such as facades, benches, noise barriers etc. against water and dirt.
Advantages
– Effective protection against water damage
– Permeable
– UV resistant
– VOC free
– Extends cleaning interval
– Estimated lifetime of approx. 5 years on vertical surfaces
Application instructions
Start by cleaning the surface thoroughly to remove dirt, algae, traffic film, oil and grease.
Allow the surface to dry so that it is dry or slightly damp but not wet. Shake the product well before use! Apply the sealer in a single layer using an airless or low-pressure spray gun or roll it on with a roller, going slowly from the top down. The treated surface must have a minimum temperature of approx. 5°C. Drying time depends on the temperature.
After approx. 7 days, the product has fully hardened and the full effectis achieved.
Dosage
The product is used in concentrated form.
Highly absorbent surfaces: 3 – 4 m2 per litre
Less absorbent surfaces: 5 – 10 m2 per litre
Packaging
236005 – 5L
236025 – 25L
