Naturacoat SC 30

Fields of application

NaturaCoat SC 30 is a reversal, sacrificial, 1-component protection system against graffiti and bill stocking marks, also against airborne contamination (soot, etc.) for facades and walls both indoors and outdoors. NaturaCoat SC 30 comprises vegetable polysaccharides and water and has a high viscosity. It is especially suitable where working conditions require not more than one coating layer. Especially suitable for all kinds of natural and artificial stone facades, concrete, brick, metallic and aluminium facades.

Advantages

– Protects against spray paint, paintbrush and marker graffiti
– Prevents occurrence of hard to clean “graffiti shadows”
– Low melting point
– Permeable
– Recommended for historical monuments and listed building facades as the pro-duct has fantastic aesthetic advantages – completely invisible but provides the surface with the
necessary protection.

Application instructions

NaturaCoat SC 30 is especially suitable for all kinds of natural and artificial stone facades, concrete, brick, metallic and aluminium facades. In case of water repellant substrates, the surface tension must first be reduced and substrates, if necessary, be pre-treated with NaturaCoat SC Primer. High alkaline conditions, like new concrete, are to be avoided.

NaturaCoat SC 30 is sprayed on the wall in one coat. Consumption: 0.2 – 0.6 l/m2 depending on porosity and texture of the substrate. Tools & equipment are cleaned with water before drying. NaturaCoat SC 30 is slippery in the moist state. Any NaturaCoat SC 30 spilt on the ground must be removed and the ground thoroughly flushed with water.

Do not use the product below +5°C.

Dosage

Use concentrated.

Packaging

463015 – 15L